filler size
英 [ˈfɪlə(r) saɪz]
美 [ˈfɪlər saɪz]
【计】填充符长度
双语例句
- Study on the Effect of Filler Particle Size on the Performance of Clutch Friction Materials
基于填料粒度对离合器摩擦材料性能影响的研究 - Effects of Filler's Size and Shape on the Tribological Properties of PTFE Composites
硅灰石形貌和尺寸因素对PTFE复合材料摩擦学性能的影响 - The differences in these systems are based on ceramic filler content and particle size, as well as the processing method to achieve polymerization.
这些树脂系统的差别主要基于瓷填料的含量与颗粒的尺寸以及聚合的操作办法。 - The addition of inorganic filler into POM can improve its stiffness, depress its cost and increase its size stability in processing.
加入无机填料，可以提高POM的刚性，降低成本，提高加工时的尺寸稳定性。 - Effects of Filler Particles on Microwave Absorbing Ability and Infrared Emissivity of Hidden Materials Size
隐身填料颗粒尺寸对雷达波吸收及红外辐射性能的影响 - The system of laser beam welding with filler wire has been developed in this paper. The effect of welding parameters on HAZ ( Heat Affected Zone) size and weld formation during high power laser welding with filler wire has been studied.
利用自行设计的填丝激光焊系统，研究了大功率CO2激光填丝焊接工艺参数对HAZ尺寸及焊缝成形的影响。 - Although the addition of alkaline filler CaCO 3 decreased its sizing efficiency, the glycerin rosin ester rosin size exhibited good sizing even applied in the pulp suspension containing about 20% alkaline filler.
虽然碱性填料碳酸钙的添加引起一定程度的施胶效果的下降，松香甘油酯松香中性施胶剂在含有碳酸钙20%以上的施胶体系中仍显示出了极佳的施胶性能。 - The further explanation of flow activation entropy decrease was made by effective stacking of filler with different size and size distribution.
还从颗粒填料的级配堆积作用的角度上对流动活化熵的降低原因作了进一步的理论解释。 - Relationship between filler's size distribution and wear rate of composite resins
复合树脂的填料尺寸分布与磨损率的相关性 - In melt blending preparation, the filler's shape, particle size, content and the different methods of the interface modification were studied.
在熔融共混法中，考察了填料的形状、粒径、含量、填料的表面处理对聚丙烯复合材料的力学性能的影响。 - The effect of filler particle size is negligible at shear rates greater than 12 s-1.
在低切变速率条件下，红泥的粒度对体系的流动性有影响，当切变速率大于12s－1时，这种影响可以忽略。 - Aluminum hydroxide powder can be used as filler for plastics and rubber. Its crystal structure, particle size and shape, surface properties can effect the filling behavior.
氢氧化铝粉体可用作塑料、橡胶等高聚物的填料，氢氧化铝的晶体结构、粒度、颗粒形状、表面性质等决定其填充性能。 - Relationship between the nature of conductive filler ( charging quantity, shapes and particle size) and the conductive performance of filled conductive paint is discussed.
讨论了导电填料的填充量、形状、粒度和填充型导电涂料导电性能的关系； - The sizes of filler and abrasive have influence on the solid particle erosion of coating under the given condition, the size of filler be of weak influence on the slurry erosion.
填料粒度和磨料粒度都对涂层的气固冲蚀磨损有影响，但在给定的试验条件下，填料粒度对涂层的浆体冲蚀磨损影响甚微。 - For the using different ratio of filler bitumen, different nominal maximum size of aggregate, different asphalt, the paper analyzed thoroughly the influence to AM, AP, then get some related rule.
论文针对不同粉胶比、不同最大公称粒径集料、使用不同沥青对Am、Ap值变化影响进行了研究，得出了相关规律。 - Distribution of Heat Content of Filler Metal Droplets and predicting and Controlling Geometry size in GMAW
GMAW熔滴热焓分布及焊缝几何尺寸的预测和控制 - The effects of the filler size and content on the tensile yield behaviour of LDPE componnd filled with glass beads were investigated by INSTRON materials tester at room temperature.
应用Instron材料试验机，考察了室温下微珠大小及含量对填充LDPE复合物拉伸屈服行为的影响。 - The effects of the kind of wood flour, the dosage of filler, particle size, plasticizer, different primers and treatments of wood flour and toughing agents on filling system were studied respectively.
研究了木粉种类、填充量、粒径、增塑剂用量、不同处理剂、不同处理方法以及不同种类增韧剂对填充体系性能的影响。 - According to the study, the arc ablation was improved by filling the inorganic materials in PTFE, and the important influence factors of the arc ablation seem to be filler content and particle size.
研究结果表明：在PTFE中添加无机填料可以明显改善耐电弧烧蚀性能，填料的添加量和粒径是影响复合PTFE电弧烧蚀量的重要因素； - The results showed that the mechanical properties of composites with untreated filler improved with the decrease of particle size. The nanocomposites were far stronger than the micro-composites.
结果表明，随着氢氧化镁粒径的减小，复合材料的力学性能逐渐提高，纳米复合材料的力学性能远优于微米复合材料的。 - In this paper, the copper coated graphite ( CCG) filler was prepared by chemical reduction method and the effect of particle size and copper thickness of CCG on the tribological behaviors of CCG-PTFE composites were investigated.
作者采用化学还原法制备了铜包石墨（CCG）粉，考察了石墨粒度和铜层厚度对铜包石墨－聚四氟乙稀复合材料摩擦学性能的影响。 - The filler with high loading level and large particle size had little effect on the blowing capacity.
高填充时粒径较大的填料对发泡效果的影响较小。 - Arc ablation and dielectric properties of PTFE Composite, which is used in nozzle of SF6 circuit breaker, are affected by various factors, including PTFE particle size, filler particle size, filler type, and addition of filler.
高压SF6断路器喷口用聚四氟乙烯（PTFE）的粒径、填料的种类、粒径和添加量，对复合PTFE介电性能和耐电弧烧蚀性能都有着明显影响。 - The effects of filler content and particle size, the amount of coupling agent and its type on mechanical properties, rheological behavior, heat resistance and moisture resistance of polypropylene composites were studied.
作者考察了纤维素填料品种、用量及粒径、偶联剂品种及用量对改性聚丙烯（PP）的力学性能、流变性能、耐热性和吸水性的影响。 - Filler Le Can only adopted with silica as a larger particle size and little surface activity.
由于补强剂Le粒径较大且表面活性不高，只能采用和白炭黑并用。 - Polypropylene ( PP) composites filled with nonmetal powders were prepared. The effects of filler size and content, the compatibilizer content on the mechanical performance and some physical properties of the composites were investigated.
实验以一定粒度的非金属粉末填充聚丙烯塑料制得复合板材，考察了粉末粒径、填充量、改性剂及用量对复合材料力学性能和物理性能的影响。 - When the filler is at the micron level, ac conductivity, dielectric constant and dielectric loss of Nickel-silicone rubber polymer composites all increase as the filler particle size is decreased.
在相同条件下，填料粒径处于微米级别的复合材料的交流电导率、介电常数和介电损耗均随着粒径的减小而增大。 - Discussed the conductive filler particle size, shape, the amount of add, silane coupling agent such as additives amount which is affect on the conductive properties of the coating and electromagnetic shielding performance.
本文研究了导电填料的粒径、形状、添加量、硅烷偶联剂等助剂用量对涂料的导电性能和电磁屏蔽性能的影响。 - In this paper, we had studied the influence of filler kinds, filler quantity, filler particle size distribution, matrix resins kinds, coupling agents 'kind and coupling agent quantity to the waste composite materials.
论文研究了不同填料、不同填料添加量、填料粒度、基体种类、偶联剂种类、偶联剂添加量对复合材料性能的影响。 - The effects on thermal conductivity property of the filler content, testing temperature and filler particle size were analyzed.
分析了填料含量、测试温度及填料粒径对复合材料导热系数的影响。